Thanks for the suggestion, unfortunately it didn’t show up using df
- 1 Post
- 12 Comments
WD Blue SSD drive in a removable case. I’ll try it another machine.
Same issue on a different machine :-(
Some more
usb 2-4: reset SuperSpeed USB device number 11 using xhci_hcd
[211953.700655] usb 2-4: reset SuperSpeed USB device number 11 using xhci_hcd [211979.236790] usb 2-4: reset SuperSpeed USB device number 11 using xhci_hcd [211979.249917] sd 1:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK cmd_age=152s [211979.249940] sd 1:0:0:0: [sdb] tag#0 CDB: Write(10) 2a 00 00 00 08 00 00 00 08 00 [211979.249950] blk_print_req_error: 752 callbacks suppressed [211979.249959] I/O error, dev sdb, sector 2048 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 0 [211979.249982] buffer_io_error: 21278 callbacks suppressed [211979.249988] Buffer I/O error on dev sdb1, logical block 0, lost async page write [212004.768420] usb 2-4: reset SuperSpeed USB device number 11 using xhci_hcd [212030.306531] usb 2-4: reset SuperSpeed USB device number 11 using xhci_hcd
So far it is showing
usb 2-4: new SuperSpeed USB device number 11 using xhci_hcd [211819.412449] usb 2-4: New USB device found, idVendor=2537, idProduct=1068, bcdDevice= 1.00 [211819.412468] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [211819.412477] usb 2-4: Product: NS1068 [211819.412484] usb 2-4: Manufacturer: Norelsys [211819.412491] usb 2-4: SerialNumber: 0123456789ABCDE [211819.415262] usb-storage 2-4:1.0: USB Mass Storage device detected [211819.415608] usb-storage 2-4:1.0: Quirks match for vid 2537 pid 1068: 800000 [211819.415722] scsi host1: usb-storage 2-4:1.0 [211821.975537] scsi 1:0:0:0: Direct-Access ATA WD Blue SA510 2. 0100 PQ: 0 ANSI: 6 [211821.976781] sd 1:0:0:0: Attached scsi generic sg1 type 0 [211821.985294] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [211821.985686] sd 1:0:0:0: [sdb] Write Protect is off [211821.985704] sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 00 [211821.986069] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn’t support DPO or FUA [211822.033052] sdb: sdb1 [211822.034239] sd 1:0:0:0: [sdb] Attached SCSI disk [211851.555550] usb 2-4: reset SuperSpeed USB device number 11 using xhci_hcd [211877.091031] usb 2-4: reset SuperSpeed USB device number 11 using xhci_hcd [211902.626842] usb 2-4: reset SuperSpeed USB device number 11 using xhci_hcd
I was first getting an error about my Fing agent. I uninstalled the Fing snap and now I am getting:
Unable to Mount 1.0 Tb volume Error mounting /dev/sdb1/ at…: can’t read superblock on /dev/sdb1/
Thanks!
floppingfish@lemmy.worldto Selfhosted@lemmy.world•sharevb/it-tools: Collection of handy online tools for developers, with great UX.English1·2 months agoLooks great!
floppingfish@lemmy.worldto No Stupid Questions@lemmy.world•What are the main criticisms of Linux in desktop platforms?English8·3 months agoI’m using Linux Mint for my daily driver for about 5 years. It works great with no ads!! I’m not a gamer and Libre Office works well for me so no significant problems with software. I also do some basic python programming on it. The more complex command line stuff takes a while to figure out but Mint has been great!
thanks for the clarity
floppingfish@lemmy.worldto Ask Lemmy@lemmy.world•Is there an active mechanic advice community on lemmy? Looking for advice.English3·4 months agoput a bead of clear silicone around the top and side seals of the light (where the light sections come together, not where the light seals to the car)
please explain like I’m 5
Linux Mint, it just works
damn right