Discuss on the forum: https://linustechtips.com/topic/1526561-what-do-we-do-now/► GET MERCH: https://lttstore.com► GET EXCLUSIVE CONTENT ON FLOATPLANE: http...
I’ve used one, and it actually is pretty good. For comparison, I have a Megapro Automotive (211R1C36RD) screwdriver. I like the ratchet and shaft knurling of the LTT more, but the smaller bits are a bit annoying (though the smaller handle size because of them is nice). Overall, it’s not a bad screwdriver, and even though it is too expensive for me, it’s another good product option in case other brands’ tools don’t fit someone’s needs.
To be clear, LTT is plenty problematic, but I don’t think “making a screwdriver” is one of their problems.
I’ve done a lot of low-voltage as well as high-voltage work through the years. So I have tool sets and screwdriver sets for low-voltage stuff, another set for high voltage stuff which is a lot of Klein and Green Lee and another set for mechanical work which is a lot of Wright Tools because I do all my own vehicle maintenance in my shop. And even another set with JIS tips specifically for Japanese motorcycles which are Vessels. Basically, I have a lot of different screwdriver sets that specialize for many different purposes. I also have sets for taking apart smaller electronics. I say all this only to give insight to my experience with tools so that I can say the next bit…
The LTT bit driver is overpriced garbage. I would re-iterate what the other person has already stated… there is nothing the LTT screwdriver does that something like a Wiha or Felo driver wouldn’t do for 1/3 to 1/2 the cost of it. Also, bit drivers save space which are great for toolbags and working on the go, but if I were to be doing consistent work on a bench there is no chance in hell that I would pick up a bit driver over a real screwdriver set.
It’s price is the most glaring problem. It’s on par with $20-$30 drivers from companies that have been building tools for decades, stand by their products, and in many cases, are industry standards in tool sets. So why would anyone pay 2-3x the price for something like the LTT screwdriver? And trust me, I get why the cost of it could be so much higher, R+D costs money, but that again goes back to the point the other person already stated, “Linus was so arrogant he didn’t even think that somebody’s already made a superior product with established tooling. But no, he has to reinvent the wheel and design a screwdriver nobody’s asked for” These other companies like Klein and Green Lee and Wiha and Felo know how to do tools. They have their processes nailed down, so they have better quality for far less money.
I’ve used one, and it actually is pretty good. For comparison, I have a Megapro Automotive (211R1C36RD) screwdriver. I like the ratchet and shaft knurling of the LTT more, but the smaller bits are a bit annoying (though the smaller handle size because of them is nice). Overall, it’s not a bad screwdriver, and even though it is too expensive for me, it’s another good product option in case other brands’ tools don’t fit someone’s needs.
To be clear, LTT is plenty problematic, but I don’t think “making a screwdriver” is one of their problems.
I’ve done a lot of low-voltage as well as high-voltage work through the years. So I have tool sets and screwdriver sets for low-voltage stuff, another set for high voltage stuff which is a lot of Klein and Green Lee and another set for mechanical work which is a lot of Wright Tools because I do all my own vehicle maintenance in my shop. And even another set with JIS tips specifically for Japanese motorcycles which are Vessels. Basically, I have a lot of different screwdriver sets that specialize for many different purposes. I also have sets for taking apart smaller electronics. I say all this only to give insight to my experience with tools so that I can say the next bit…
The LTT bit driver is overpriced garbage. I would re-iterate what the other person has already stated… there is nothing the LTT screwdriver does that something like a Wiha or Felo driver wouldn’t do for 1/3 to 1/2 the cost of it. Also, bit drivers save space which are great for toolbags and working on the go, but if I were to be doing consistent work on a bench there is no chance in hell that I would pick up a bit driver over a real screwdriver set.
I see. Thanks for the correction. What would you say the issues with it are?
It’s price is the most glaring problem. It’s on par with $20-$30 drivers from companies that have been building tools for decades, stand by their products, and in many cases, are industry standards in tool sets. So why would anyone pay 2-3x the price for something like the LTT screwdriver? And trust me, I get why the cost of it could be so much higher, R+D costs money, but that again goes back to the point the other person already stated, “Linus was so arrogant he didn’t even think that somebody’s already made a superior product with established tooling. But no, he has to reinvent the wheel and design a screwdriver nobody’s asked for” These other companies like Klein and Green Lee and Wiha and Felo know how to do tools. They have their processes nailed down, so they have better quality for far less money.