Nevermind abroad. A lot of them would do well just to get some actual exposure to larger cities in their own states.
Part of the urban/rural divide is fueled by the pervasive belief that cities are lawless hellholes because they’ve never had real exposure to it.
Worth noting that ATC is unusual in that there is both a maximum age that you can start (30) as well as a mandatory retirement age (56).
The transmission in those things is an amazing level of suck, too. It’s this bizarre automatic manual thing that’s just awful to drive.
Stakeholders are people with any kind of interest in the company doing well
Corporate social responsibility as a concept is even broader than that – it’s not just anyone who has interest in the company doing well, but broad consideration of anyone impacted by the decisions of the company.
A company might be able to save operational costs by dumping toxic sludge in a river, but within a CSR framework, people living downstream would be considered stakeholders and the potential negative impact of the decision on those people is supposed to be taken into account when decisions are made. The corporation is supposed to have a responsibility to do right by anyone impacted by their actions wherever possible.
At least that’s the theory. It shouldn’t be surprising that the language of CSR gets pretty commonly coopted by companies looking to whitewash what they’re actually doing.
The wider international community has largely rejected wars of conquest as legitimate in modern times.
The exact same argument could be applied to Israel and e.g. the Golan Heights, but I don’t think you’ll find that to be a particularly popular position.
“Canceled” is a term assholes came up with to rebrand “consequences” to make it seem like something that isn’t their own fault.
Not sure I agree with this particular take. My recollection is that this usage of cancelled started in progressive internet spaces and was absolutely used to describe consequences for being an asshole.
It’s the exact same trajectory woke took – it was language used by left-leaning people that got co-opted and intentionally diluted by conservatives.
Refusing to cooperate with Democrats is what sank him.
He needed support from Democrats to keep the Speakership. He’s spent the entire year giving them no reason to trust him – including going on the Sunday shows this week knowing this vote was coming and trying to blame Democrats for the near shutdown.
Something like a body panel is going to expand/contract a couple of orders of magnitude more than 10 microns just from the weather changing day-to-day.
Chiming back in here to say that yes, that was exactly my point.
To maybe make it a little clearer, a hypothetical: imagine a Republican-controlled state enacts a law banning late term abortions and makes it punishable with jail time for women to receive one.
That hypothetical law includes a clause defining a late term abortion as one taking place at any time past 37 weeks from conception.
A woman has an abortion at 36 weeks pregnant. Anti-abortion activists insist that she should be culpable under the law; an abortion at 36 weeks is functionally the same as an abortion at 37 weeks and 36 weeks is very obviously late term pregnancy, they claim.
If the local sheriff then arrests that woman, is the sheriff behaving lawfully?
That’s why the government being bound to the letter of the law is so incredibly important. A law can be stupid, harmful, regressive, or otherwise bad in any number of ways, but if the government must act within the law as written, then at least we know what rules we’re playing by and can work to change them.
If the government is allowed to arbitrarily and capriciously ignore the letter of the law in favor of what the people enforcing it wish the law were, that will be abused by bad actors. That sort of thing is more or less a universal component of authoritarianism.
tl;dr - we shouldn’t do it because allowing it will allow it to be used against us.
If the law says you can’t kill people by driving into them, and then someone slides into them (intentionally), is that illegal?
It depends on how it’s defined in the law. States generally don’t write laws that define vehicular homicide solely as striking a person specifically with the front of a passenger car for exactly this reason. Further, the need for precision in law is why intentional acts and negligent acts are generally defined separately e.g., murder vs manslaughter.
Beyond that, judges exist and are given sentencing discretion (or at least should be) because there are mitigating circumstances… in other words shit happens.
Discretion in enforcement/prosecution is not the same thing as enforcing something that isn’t defined in law. One is arguably a necessary component of real justice, the other is how authoritarianism functions.
The National Firearms Act has very specific language defining what constitutes a machine gun. It does not include language giving the executive branch power to expand that definition. Either something meets that legal definition and is legally a machine gun or it isn’t.
I’m not even saying that it’s impossible for an enforcing agency to be given those powers – the FDA, for example, has been given pretty sweeping authority to classify drugs. In fact, they have the explicit authority to classify analogs of illegal drugs as illegal. That’s basically the parallel to what’s being discussed here with the NFA and the ATF.
The difference is that Congress hasn’t given the ATF the authority to do so. If you want the law to grant the ability to enforce a less specific definition than what exists in the current law then you need to either change the law to carry a more expansive definition and/or give the enforcing agency the power to make that definition outright. Either of those things would allow the sort of enforcement the other commenter was calling for, but it would be within the letter of the law.
The point wasnt that you can’t enact a particular law or even that you can’t allow for enforcement to be adaptive – it was that rule of law requires that adaptiveness to be defined within the law itself. It’s totally okay if the law says “it depends and here’s who decides.” It’s not okay to decide to enforce the law on the basis of “this is what I feel like the law should do” even if the actual language of the law doesn’t support it.
There’s the letter of the law and then there’s the spirit of the law.
Only the former should be legally enforceable. If you start enforcing the latter regardless of the former, the legal system stops being about rule of law and more about the subjective whims of those enforcing it.
If the letter of the law doesn’t capture the intent, then the law needs to change, but laws shouldn’t be subjectively enforced on the basis of what someone feels like they should mean rather than what they actually say.
It’s SEO-optimization nonsense.
It’s why all the appeals to “what would Aaron think” with the whole API thing were really off the mark.
spez and kn0thing were college buddies. Swartz was kind of pushed onto them by YC. I’ve never had the impression that they felt any particular attachment to him; he was a business partner that became involved at the behest of the people funding them, who left in the first couple of years.
A 2.4 will be better than an Ender 3, but there are better options out there. The flying gantry is a solution in search of a problem, the gantry is heavy and not particularly rigid, Voron toolheads don’t cool particularly well, the rigid bed mounting is a recipe for bed taco, etc.
Which isn’t to say that V2s are bad printers – they can turn out great prints. But if you’re starting fresh today, I’d seriously consider any number of printers over it.
If you want to stay within the Voron ecosystem for whatever reason, the Trident’s a better design. It still lacks things like kinematic bed mounting that are standard fair on other designs today, though. I’d stay away from Tap on any of them – I’m still baffled that thing gets promoted as being a good idea.
In terms of bang for your buck, it’s incredibly difficult to beat the VzBot kits. It’ll be a less expensive and more capable machine than a V2.4. There are panels available to enclose it. I don’t love the Z stage on it, but I can overlook it given the value the rest of the printer gets you.
The Annex K3 is an absolutely killer little machine, but is only 180x180 build volume. The small build volume is free rigidity, though, and K3s can be made true high temp capable with less relative effort than a lot of printers. I’m not as big a fan of the larger Annex printers (K1/K2), personally.
The Rat Rig v-Core was probably the best value CoreXY before the VzBot kits came around. Enclosing them is more of a challenge due to all the PETG parts, though. The EVA toolhead provides a ton of flexibility for mixing and matching parts, if that’s your thing.
In terms of take it out of the box and print, nothing beats the Bambu X1 and P1P. They’re great units. They’re a closed ecosystem though, and not modification friendly if that’s what you want.
My main workhorse printer’s a Railcore II. Great machine, but the design’s aging and I generally wouldn’t recommend a new build today outside of a few very specific applications. It was cutting edge when the design was released in 2018, but, as with the 2.4, the wider community has learned a lot since then about fundamental printer design and there are better options now.
Assuming you’re in the US, I 100% would’ve done a credit card chargeback. Bank would’ve taken your side on that one.